PLEASE CALL 0800 389 5289 FOR EVEN BETTER THAN ADVERTISED PRICE!

Features of the Pumping Station:
- 6 year conditional parts warranty on pump
- Cast iron & stainless steel construction
- Full 50mm solids handling capacity
- Double Mechanical seal with oil chamber in between
- Non-clogging vortex impeller
- 10 metres of cable
- Float switch as standard
- Suitable for connection to 63mm o/d outlet pipe
- 610mm diameter for easier installation in troublesome areas
- Anti-flotation device helps to eliminate chamber from floating
- High water alarm available as optional extra
- Job ready for easy installation

Please note:

There must be a minimum of 450mm below the bottom of the inlet pipe to the base of the chamber to allow for the pump to operate.

The information on the properties quoted are given as guidance. Buyers and users are advised of these facts so they can make their own assessment of our products under their own conditions when necessary.

Optional Extras:

Delivery from £33.25 + VAT = £39.90

450mm access cover and frame add £25.00 + VAT = £30.00
110mm inlet rubber (on site drilling required) £8.28 + VAT = £9.94
Holesaw for above referenced inlet rubber £16.00 + VAT = £19.20
Arbor for holesaw (fits all holesaws offered) £5.20 + VAT = £6.24
High level alarm system from £20.00 + VAT = £24.00
50mm i/d grommet for cable ducting £3.70 + VAT = £4.44
Holesaw for above referenced ducting grommet £7.80 + VAT = £9.36
MDPE 63mm discharge pipe connector (use for any metric 63mm o/d plastic pipe) £6.90 + VAT = £8.28
63mm o/d (55mm bore) Grey PVC spiral, heavy duty/in-ground resilient, discharge hose £8.80 + VAT = £10.56 per metre (max 25 metre coil)
Pump motor thermal protector box MUST BE CONNECTED FOR PUMP WARRANTY £48.00 + VAT = £57.60

(Full list of all other optional extras in image 3)

Collection available from CT3 3HS if delivery not required. Please phone 0800 3895289 to discuss collection options.